balance/motor_move.ino

// Setup Motor A (front and rear) pins
int enableA = 1;
int pinA1 = 3;
int pinA2 = 2;

// Setup Motor B (front and rear) pins
int enableB = 6;
int pinB1 = 5;
int pinB2 = 4;

void setup() {
  // The setup code goes here and runs once only
  // Configure the pin modes for each drive motor
   pinMode (enableA, OUTPUT);
   pinMode (pinA1, OUTPUT);
   pinMode (pinA2, OUTPUT);
   pinMode (enableB, OUTPUT);
   pinMode (pinB1, OUTPUT);
   pinMode (pinB2, OUTPUT);
   

}

void loop() {
  // Main code goes here and will run repeatedly:
  car(); // function keeps moving car forward while distance of objects in front are > 15cm away
  avoid(); // function makes car go back, turn slightly right to move forward in new direction
}


// Create motor functions
void motorAforward() {
 digitalWrite (pinA1, HIGH);
 digitalWrite (pinA2, LOW);
}
void motorBforward() {
 digitalWrite (pinB1, LOW);
 digitalWrite (pinB2, HIGH);
}
void motorAbackward() {
 digitalWrite (pinA1, LOW);
 digitalWrite (pinA2, HIGH);
}
void motorBbackward() {
 digitalWrite (pinB1, HIGH);
 digitalWrite (pinB2, LOW);
}
void motorAstop() {
 digitalWrite (pinA1, HIGH);
 digitalWrite (pinA2, HIGH);
}
void motorBstop() {
 digitalWrite (pinB1, HIGH);
 digitalWrite (pinB2, HIGH);
}
void motorAcoast() {
 digitalWrite (pinA1, LOW);
 digitalWrite (pinA2, LOW);
}
void motorBcoast() {
 digitalWrite (pinB1, LOW);
 digitalWrite (pinB2, LOW);
}
void motorAon() {
 digitalWrite (enableA, HIGH);
}
void motorBon() {
 digitalWrite (enableB, HIGH);
}
void motorAoff() {
 digitalWrite (enableA, LOW);
}
void motorBoff() {
 digitalWrite (enableB, LOW);
}



// Setup movement functions
void forward (int duration) {
 motorAforward();
 motorBforward();
 delay (duration);
}
void backward (int duration) {
 motorAbackward();
 motorBbackward();
 delay (duration);
}
void right (int duration) {
 motorAbackward();
 motorBforward();
 delay (duration);
}
void left (int duration) {
 motorAforward();
 motorBbackward();
 delay (duration);
}
void coast (int duration) {
 motorAcoast();
 motorBcoast();
 delay (duration);
}
void breakRobot (int duration) {
 motorAstop();
 motorBstop();
 delay (duration);
}
void disableMotors() {
 motorAoff();
 motorBoff();
}
void enableMotors() {
 motorAon();
 motorBon();
}



// Setup the main car function
void car() {
int distance_0;
distance_0 = distance();
  // Keep moving forward in a straight line while distance of objects in front > 15cm away
  while(distance_0 > 15)
  {
     motorAon();
     motorBon();
     forward(1);
     distance_0 = distance();
  }
  breakRobot(0);
}