Browse Source

Autonomous car parking code.

master
Evangelos Oulis 5 years ago
parent
commit
1e4bba322a
  1. 127
      autonomousCar/driver.ino/driver.ino.ino

127
autonomousCar/driver.ino/driver.ino.ino

@ -0,0 +1,127 @@
/*
* Athors: Oulis Evnagelos, Oulis Nikolaos, Katsibras Drosos
* Ultrasonic Sensor HC-SR04 and Arduino
* Dual Stepper Motor Shiled 1.1
*
*/
// defines pins numbers
const int trigPin = 10;
const int echoPin = 9;
const int response = 12;
const int in1 = 2;
const int in2 = 4;
const int in3 = 7;
const int in4 = 8;
const int rightSpeed = 5;
const int leftSpeed = 3;
// defines variables
long duration;
int distance;
void clearUltrasonic(){
// Clears the trigPin
analogWrite(trigPin, LOW);
delayMicroseconds(2);
}
void setup() {
pinMode(trigPin, OUTPUT); // Sets the trigPin as an Output
pinMode(echoPin, INPUT); // Sets the echoPin as an Input
pinMode(response, OUTPUT); // Sets to led aoutput.
pinMode(in1, OUTPUT); //Motor Driver 1st Pin
pinMode(in2, OUTPUT); //Motor Driver 2nd Pin
pinMode(in3, OUTPUT); //Motor Driver 3rd Pin
pinMode(in4, OUTPUT); //Motor Driver 4th Pin
pinMode(rightSpeed, OUTPUT);
pinMode(leftSpeed, OUTPUT);
Serial.begin(9600); // Starts the serial communication
clearUltrasonic();
}
//Stepper Function
void step(/*boolean dir,*/int steps){
// digitalWrite(dirPin1,dir);
// digitalWrite(dirPin2,dir);
delay(50);
for(int i=0;i<steps;i++){
forward();
delayMicroseconds(100);
motor_stop();
delayMicroseconds(100);
}
}
void turnLeft(){
analogWrite(leftSpeed, 255);
analogWrite(rightSpeed, 0);
}
void turnRight(){
analogWrite(leftSpeed, 0);
analogWrite(rightSpeed, 255);
}
void absolute(){
analogWrite(leftSpeed, 255);
analogWrite(rightSpeed, 255);
}
void backward(){
// Set Motor A backward
digitalWrite(in1, HIGH);
digitalWrite(in2, LOW);
// Set Motor B backward
digitalWrite(in3, HIGH);
digitalWrite(in4, LOW);
}
void forward(){
// Set Motor A forward
digitalWrite(in1, LOW);
digitalWrite(in2, HIGH);
// Set Motor B forward
digitalWrite(in3, LOW);
digitalWrite(in4, HIGH);
}
void motor_stop(){
digitalWrite(in1, LOW);
digitalWrite(in2, LOW);
digitalWrite(in3, LOW);
digitalWrite(in4, LOW);
}
void loop() {
// Sets the trigPin on HIGH state for 10 micro seconds
analogWrite(trigPin, HIGH);
delayMicroseconds(10);
analogWrite(trigPin, LOW);
// Reads the echbackwardoPin, returns the sound wave travel time in microseconds
duration = pulseIn(echoPin, HIGH);
// Calculating the distance
distance= duration*0.034/2;
// Prints the distance on the Serial Monitor
//Serial.print("Distance: ");
//Serial.println(distance);
absolute();
if (distance < 10){
motor_stop();
digitalWrite(response, HIGH);
}
else{
forward();
digitalWrite(response, LOW);
}
clearUltrasonic();
delay(1500);
}
Loading…
Cancel
Save