Browse Source

v1.1

master
cs151051 5 years ago
parent
commit
c69f5535da
  1. 61
      sensorNode/sensorNode.ino
  2. 2
      webInterface/parking.html

61
sensorNode/sensorNode.ino

@ -0,0 +1,61 @@
/*
* Athors: Oulis Evnagelos, Oulis Nikolaos, Katsibras Drosos
* Ultrasonic Sensor HC-SR04 and Arduino
*
*/
// defines pins numbers
const int trigPin = 9;
const int echoPin = 10;
const int response = 6;
const int response1 = 5;
const int id = 2;
// defines variables
long duration;
int distance;
void setup() {
pinMode(trigPin, OUTPUT); // Sets the trigPin as an Output
pinMode(response, OUTPUT);
pinMode(response1, OUTPUT);
pinMode(echoPin, INPUT); // Sets the echoPin as an Input
Serial.begin(9600); // Starts the serial communication
// Clears the trigPin
digitalWrite(trigPin, LOW);
delayMicroseconds(2);
}
void loop() {
// Sets the trigPin on HIGH state for 10 micro seconds
digitalWrite(trigPin, HIGH);
delayMicroseconds(10);
digitalWrite(trigPin, LOW);
// Reads the echoPin, returns the sound wave travel time in microseconds
duration = pulseIn(echoPin, HIGH);
// Calculating the distance
distance= duration*0.034/2;
// Prints the distance on the Serial Monitor
//Serial.print("Distance: ");
//Serial.println(distance);
String park_out;
if (distance < 4){
park_out = String(id) + "#0"; //parking isn't available.
digitalWrite(response, LOW);
digitalWrite(response1, HIGH);
}
else{
park_out = String(id) + "#1"; //parking is available.
digitalWrite(response, HIGH);
digitalWrite(response1, LOW);
}
Serial.println(park_out);
delay(500);
}

2
webInterface/parking.html

@ -1,5 +1,5 @@
<!-- <!--
#Authors: Oulis Evangelos, Oulis Nikolaos, Drosos Katsibras #Authors: Oulis Evangelos, Oulis Nikolaos, Katsibras Drosos
#=================================================================== #===================================================================
--> -->
<!DOCTYPE html> <!DOCTYPE html>

Loading…
Cancel
Save