From 8cb16aff0dfcc851ddc8822f713097438a8cbfed Mon Sep 17 00:00:00 2001
From: cse44742 <cse44742@uniwa.gr>
Date: Mon, 24 Jan 2022 10:31:30 +0000
Subject: [PATCH] Upload files to ''

---
 code.ino | 65 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 65 insertions(+)
 create mode 100644 code.ino

diff --git a/code.ino b/code.ino
new file mode 100644
index 0000000..637179f
--- /dev/null
+++ b/code.ino
@@ -0,0 +1,65 @@
+#include <OneWire.h>
+#include <DallasTemperature.h>
+#define ONE_WIRE_BUS 2
+OneWire oneWire(ONE_WIRE_BUS);
+DallasTemperature sensors(&oneWire);
+DeviceAddress insideThermometer;
+
+void setup(void)
+{
+  Serial.begin(9600);
+  Serial.println("Dallas Temperature IC Control Library Demo");
+  Serial.print("Locating devices...");
+  sensors.begin();
+  Serial.print("Found ");
+  Serial.print(sensors.getDeviceCount(), DEC);
+  Serial.println(" devices.");
+  Serial.print("Parasite power is: "); 
+  if (sensors.isParasitePowerMode()) Serial.println("ON");
+  else Serial.println("OFF");
+  
+
+  if (!sensors.getAddress(insideThermometer, 0)) Serial.println("Unable to find address for Device 0"); 
+  
+ 
+  Serial.print("Device 0 Address: ");
+  printAddress(insideThermometer);
+  Serial.println();
+  sensors.setResolution(insideThermometer, 9);
+ 
+  Serial.print("Device 0 Resolution: ");
+  Serial.print(sensors.getResolution(insideThermometer), DEC); 
+  Serial.println();
+}
+void printTemperature(DeviceAddress deviceAddress)
+{
+  
+  float tempC = sensors.getTempC(deviceAddress);
+  if(tempC == DEVICE_DISCONNECTED_C) 
+  {
+    Serial.println("Error: Could not read temperature data");
+    return;
+  }
+  Serial.print("Temp C: ");
+  Serial.print(tempC);
+  Serial.print(" Temp F: ");
+  Serial.println(DallasTemperature::toFahrenheit(tempC)); // Converts tempC to Fahrenheit
+}
+
+void loop(void)
+{ 
+
+  Serial.print("Requesting temperatures...");
+  sensors.requestTemperatures(); // Send the command to get temperatures
+  Serial.println("DONE");
+  
+  printTemperature(insideThermometer); // Use a simple function to print out the data
+}
+void printAddress(DeviceAddress deviceAddress)
+{
+  for (uint8_t i = 0; i < 8; i++)
+  {
+    if (deviceAddress[i] < 16) Serial.print("0");
+    Serial.print(deviceAddress[i], HEX);
+  }
+}
\ No newline at end of file