= Data collector!
  
image::ROOT:swarmlab.png[swarmlab,150,float=right]

The data collector is a lightweight microservice application that sends metadata, collected from a system, such as an IoT network, distributed system, data center, etc.

The data are transmitted, stored, and can be retrieved at any time.

== Start 

You can start it in the same way as you start any other application.

TIP: You can find more information http://docs.swarmlab.io/SwarmLab-HowTos/swarmlab/docs/swarmlab/docs/hybrid/start-microservices.html[here^]


=== Open web interface


image::ROOT:openweb.png[float=right]



==== Step 1: Download Raspbian

https://www.raspberrypi.org/downloads/raspbian/[Download^] the Raspbian disc image  - Choose Raspbian Lite

[NOTE]
.Why Raspbian Lite?
====
Because it is a lightweight version of the Raspbian and it doesn’t have a graphical user interface installed.

This means that it doesn’t have any unnecessary software installed that we don’t need for our  projects, so this makes it the perfect solution for future automation projects.
====

==== Step 2: Unzip the file


- Windows users, you’ll want 7-Zip.
- Linux users will use the appropriately named Unzip.


==== Step 3: Write the disc image to your microSD card

Next, pop your microSD card into your computer and write the disc image to it. You’ll need a specific program to do this:

- Windows users, your answer is https://sourceforge.net/projects/win32diskimager/[Win32 Disk Imager^].
- Linux people, https://www.balena.io/etcher/[Etcher – which also works on Windows – is what the Raspberry Pi Foundation recommends^]

The process of actually writing the image will be slightly different across these programs, but it’s pretty self-explanatory no matter what you’re using.

- Each of these programs will have you select the destination (make sure you’ve picked your microSD card!) and the disc image (the unzipped Raspbian file).
- Choose, double-check, and then hit the button to write.


==== Step 4: Enabling SSH

- Windows users

.Create ssh file (no extension)
image::ROOT:ssh-file-to-sd-card.jpg[alt="Create ssh file"]

- Linux Users

.Create ssh file
[source,bash]
----
sudo fdisk -l
# find dev and Boot partition
sudo mkdir /mnt/sdcardP1
sudo mount /dev/device_partion_boot /mnt/sdcardP1 -rw
cd /mnt/sdcardP1
sudo touch ssh
----

==== Step 5: Put the microSD card in your Pi and boot up

Your default credentials are username **pi** and password **raspberry**


==== Step 6: Access via SSH


-  The boot protocol for the ethernet interface is set to DHCP by default

You can find the open SSH ports on your network using the nmap utility:


.find ports on Network
[source,bash]
----
nmap -p 22 --open -sV 192.168.1.0/24
----

You should find your pi listed in the output along with the IP assigned to the pi.


- You can change the boot protocol to static and define a static IP address for the pi by editing the ifcfg-eth0 file:

.static IP address
[source,bash]
----
sudo fdisk -l
# find dev and Boot partition
sudo mkdir /mnt/sdcardP1
sudo mount /dev/device_partion_ext /mnt/sdcardP1 -rw
cd /mnt/sdcardP1
vi /etc/sysconfig/network-scripts/ifcfg-eth0
----

Then edit the file to suit your needs

.static IP address
[source,bash]
----
DEVICE=eth0
BOOTPROTO=static
ONBOOT=yes
NETWORK=192.168.1.0
NETMASK=255.255.255.0
IPADDR=192.168.1.200
GATEWAY=192.168.1.1
----


==== Step 7: Configure your Raspberry Pi.

**raspi-config** is the Raspberry Pi configuration tool


.config Pi
[source,bash]
----
sudo raspi-config
----

It has the following options available:

.config options
[source,bash]
----

┌──────────┤ Raspberry Pi Software Configuration Tool (raspi-config) ├─┐
│                                                                      │
│ 1 Change User Password Change password for the current user          │
│ 2 Network Options      Configure network settings                    │
│ 3 Boot Options         Configure options for start-up                │
│ 4 Localisation Options Set up language and regional settings         │
│ 5 Interfacing Options  Configure connections to peripherals          │
│ 6 Overclock            Configure overclocking for your Pi            │
│ 7 Advanced Options     Configure advanced settings                   │
│ 8 Update               Update this tool to the latest version        │
│ 9 About raspi-config   Information about this configuration tool     │
│                                                                      │
│                    <Select>                           <Finish>       │
│                                                                      │
└──────────────────────────────────────────────────────────────────────┘

----


=== Arduino Uno Raspberry Pi Serial Communication

==== Serial config on Raspi


.config 1 (recommended)
[source,bash]
----
whoami
sudo usermod -a -G dialout pi
reboot
----

This gives read/write permission for all users to the Raspberry Pi (potentially unsafe):

.config 2
[source,bash]
----
sudo chmod 777 /dev/ttyACM0
----

This provides some configuration for the Arduino serial connection:

.configuration for the Arduino serial connection
[source,bash]
----
sudo stty -F /dev/ttyACM0 cs8 9600 ignbrk -brkint -icrnl -imaxbel -opost -onlcr -isig -icanon -iexten -echo -echoe -echok -echoctl -echoke noflsh -ixon -crtscts
----

==== Reading in  arduino

.C code in the arduino
[source,bash]
----
void loop() {
    meas = analogRead(a);
    if (Serial.available())
    {
        if (Serial.read() == '1')
        {
            Serial.println(meas);
        }
    }
}
----

==== Python

.Python code in Raspberry Pi
[source,python]
----
import serial
from datetime import datetime
from time import sleep
now = datetime.now()

ser = serial.Serial('/dev/ttyACM0', 9600)
ser.write("1".encode())
sleep(0.05);
s = ser.readline()

file = open("dataset", "a")
file.write(now.strftime("%Y-%m-%d %H:%M") + " Sensor Value:" + str(s)+ "\n")
file.close()
----

==== PHP

[NOTE]
.PHP Class
====
https://gist.github.com/gravataLonga/6c89821b845d15e939a0/archive/0d0063684d388a8ff53df8e73e55f4cb1187d7cd.zip[Download Class]
====

.PHP code in Raspberry Pi - read
[source,php]
----
<?php

include "php_serial.class.php";

$serial = new phpSerial();
$serial->deviceSet("/dev/ttyACM0");
$serial->confBaudRate(9600);
$serial->confParity("none");
$serial->confCharacterLength(8);
$serial->confStopBits(1);
$serial->confFlowControl("none");

$serial->deviceOpen();
$read = $serial->readPort();
$serial->deviceClose();

echo $read
----


Sends a string to the Arduino.

.PHP code in Raspberry Pi - send
[source,php]
----
<?php

error_reporting(E_ALL);
ini_set('display_errors', '1');
include "php_serial.class.php";

$serial = new phpSerial;
$serial->deviceSet("/dev/ttyAMA0");
$serial->confBaudRate(115200);
$serial->confParity("none");
$serial->confCharacterLength(8);
$serial->confStopBits(1);
$serial->deviceOpen();
$serial->sendMessage("Hello from my PHP script, say hi back!");

$serial->deviceClose();

echo "I've sended a message! \n\r";
----

==== NodeJS

[NOTE]
====
Read the writing carefully on your Raspberry Pi circuit board to confirm it indicates something like “Raspberry Pi 4 Model B” or “Raspberry Pi 2 Model B”. If in doubt, run the following command in the terminal:

    $ uname -m

If the result returned starts with **“armv6”**, you are running a Raspberry Pi based on the older ARMv6 chipset and the next Node.js installation step **will not work**; otherwise, you are ready for the next step.
====


.Install NodeJS
[source,bash]
----
curl -sL https://deb.nodesource.com/setup_13.x | sudo -E bash -
sudo apt install -y nodejs
npm install raspi-serial
----


.Install NodeJS - armv6
[source,bash]
----
cd ~
wget http://nodejs.org/dist/v6.2.1/node-v6.2.1-linux-armv6l.tar.gz
tar -xzf node-v6.2.1-linux-armv6l.tar.gz
cd node-v6.2.1-linux-armv6l/
sudo cp -R * /usr/local/
export PATH=$PATH:/usr/local/bin
npm install raspi-serial
----


.NodeJS code in Raspberry Pi - read
[source,c]
----
mport { init } from 'raspi';
import { Serial } from 'raspi-serial';

init(() => {
  var serial = new Serial();
  serial.open(() => {
    serial.on('data', (data) => {
      process.stdout.write(data);
    });
    serial.write('Hello from raspi-serial');
  });
});
----



=== Send data2server


==== NodeJS

.NodeJS code in Raspberry Pi - send
[source,c]
----

...
var serverIOT=IP_SERVER
	const socket = require('socket.io-client')('https://'+serverIOT+':9080');
	socket.on('connect', function () {
		socket.emit('subscribe', log);
 		var obj = new Object();
   	obj.room = log;
   	obj.message  = data;
   	var text = JSON.stringify(obj);
		var text1 = Buffer.from(text);
		var text5 = text1.toString('base64');
		socket.emit('log', text5, log )
        //console.log(util.inspect(text5, false, null, true /* enable colors */))

    res.json({
        'message':"ok"
    });
	});

...

----

TIP: You can find more information https://git.swarmlab.io:3000/zeus/iot-swarm-example/src/branch/master[here^]  and http://docs.swarmlab.io/SwarmLab-HowTos/index-lab.adoc.html#_iot_swarm_implementation[here^]



== How to communicate Arduino2Raspberry

Blinking example (*)

=== Arduino code 


[source,c]
----

/*
 * serial_usb_simple_arduino - For communicating over USB serial. Send it a '1' (character one)
 * and it will make the builtin LED start blinking every one second. Send it a '0'
 * (character zero) and it will make it stop blinking.
 *
 * Each time it receives one of the commands, it sends back an 'A' for acknowledge.
 * But send it a commmand it doesn't recognize and it sends back an 'E' for error.
 */

bool blinking = false;
bool led_on = false;
int target_time;

void setup() {
  Serial.begin(115200);
  while (!Serial) {
    ; // wait for serial port to connect. Needed for native USB
  }
  pinMode(LED_BUILTIN, OUTPUT);
}

void loop() {
  char c;

  if (Serial.available() > 0) {
    c = Serial.read();
    switch (c) {
    case '0':
      // stop blinking
      blinking = false;
      if (led_on) {
        digitalWrite(LED_BUILTIN, LOW);
      }
      Serial.write("A", 1);
      break;
    case '1':
      // start blinking
      if (blinking == false) {
        blinking = true;
        digitalWrite(LED_BUILTIN, HIGH);
        led_on = true;
        target_time = millis() + 100; // turn off in 1 tenth of a second (100 milliseconds)
      }
      Serial.write("A", 1);
      break;
    default:
      Serial.write("E", 1);
      break;
    }
  } else if (blinking) {
    if (millis() >= target_time) {
      if (led_on) {
        digitalWrite(LED_BUILTIN, LOW);
        led_on = false;
        target_time = millis() + 100; // turn on in 1 tenth of a second (100 milliseconds)
      } else {
        digitalWrite(LED_BUILTIN, HIGH);
        led_on = true;
        target_time = millis() + 100; // turn off in 1 tenth of a second (100 milliseconds)
      }
    }
  }
}

----

=== Raspberry Pi C language

[source,c]
----

/*
 * serial_usb_simple - Demo that communicates over USB using serial I/O
 * from a Raspberry Pi to an Arduino.
 *
 * To show that it work, this writes a '1' to the Arduino which then
 * blinks the builtin LED on and off. The Arduino also sends back an 'A'
 * to acknowledge that it got the message. This does a read() to get
 * the 'A', demonstrating that reading also works. Two seconds later,
 * this writes a '0' to the Arduino which then stops the blinking.
 * The Arduino again sends back an 'A' to acknowledge that it got the
 * message and this reads the 'A'.
 *
 * This was tested between a Raspberry Pi 3B (running Raspbian) and
 * an Arduino Mega 2560 and also between an NVIDIA Jetson TX1 (running
 * Ubuntu) and the same Arduino.
*/

#include <errno.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
// for the serial I/O
#include <fcntl.h>
#include <termios.h>
#include <unistd.h>
#include <linux/serial.h>
#include <sys/ioctl.h>
#include <sys/stat.h>

int open_serial_port(char *name)
{
	int fd, bits;
	struct termios term;
	struct serial_struct kernel_serial_settings;

	if ((fd = open(name, O_RDWR | O_NONBLOCK | O_NOCTTY )) == -1) {
		fprintf(stderr, "open(%s) failed: %s\n", name, strerror(errno));
		return -1;
	}

	/*
	 * Reset the Arduino's line. This is key to getting the write to work.
	 * Without it, the first few writes don't work.
	 * Clear DTR, wait one second, flush input, then set DTR.
	 * Without this, the first write fails.
 	*/
	if (ioctl(fd, TIOCMGET, &bits) < 0) {
		close(fd);
		perror("ioctl(TCIOMGET)");
		return -1;
	}
	bits &= ~(TIOCM_DTR | TIOCM_RTS);
	if (ioctl(fd, TIOCMSET, &bits) < 0) {
		close(fd);
		perror("ioctl(TIOCMSET)");
		return -1;
	}
	sleep(1);
	tcflush(fd, TCIFLUSH);
	bits &= TIOCM_DTR;
	if (ioctl(fd, TIOCMSET, &bits) < 0) {
		close(fd);
		perror("ioctl(TIOCMSET)");
		return -1;
	}

	memset(&term, 0, sizeof(term));
	term.c_iflag = IGNBRK | IGNPAR;
	term.c_cflag = CS8 | CREAD | HUPCL | CLOCAL;
	cfsetospeed(&term, B115200);
	cfsetispeed(&term, B115200);
	if (tcsetattr(fd, TCSANOW, &term) < 0) {
		perror("tcsetattr()");
		return -1;
	}
	if (ioctl(fd, TIOCGSERIAL, &kernel_serial_settings) == 0) {
		kernel_serial_settings.flags |= ASYNC_LOW_LATENCY;
		ioctl(fd, TIOCSSERIAL, &kernel_serial_settings);
	}
	tcflush(fd, TCIFLUSH);

	return fd;
}

int read_from_serial(int fd, char *buf)
{
	int n;

	while (1) {
		if ((n = read(fd, buf, 1)) == -1) {
			if (errno != EAGAIN) {
				fprintf(stderr, "read() failed: (%d) %s\n", errno, strerror(errno));
				return -1;
			}
			// errno == EAGAIN, loop around and read again
		} else {
			if (n == 1) {
				return n; // stop reading
			}
			// read 0 bytes, loop around an read again
		}
	}
}

int main(int argc, char **argv)
{
	int fd;
	ssize_t n;
	char buf[10];

	if ((fd = open_serial_port("/dev/ttyACM0")) == -1) {
		exit(EXIT_FAILURE);
	}

	while (1) {

		printf("Telling the Arduino to start blinking...\n");

		if ((n = write(fd, "1", 1)) == -1) {
			fprintf(stderr, "write() failed: %s\n", strerror(errno));
			exit(EXIT_FAILURE);
		}

		// read to get the acknowledgement from the Arduino

		if (read_from_serial(fd, buf) == -1) {
			exit(EXIT_FAILURE);
		}
		buf[1] = '\0';
		printf("Arduino sent back '%s'\n", buf);

		sleep(2);

		printf("Telling the Arduino to stop blinking...\n");

		if ((n = write(fd, "0", 1)) == -1) {
			fprintf(stderr, "write() failed: %s\n", strerror(errno));
			exit(EXIT_FAILURE);
		}

		// read to get the acknowledgement from the Arduino

		if (read_from_serial(fd, buf) == -1) {
			exit(EXIT_FAILURE);
		}
		buf[1] = '\0';
		printf("Arduino sent back '%s'\n", buf);

		sleep(2);
	}

	return EXIT_SUCCESS;
}

----

=== Raspberry Pi Python


[source,c]
----

"""
serial_usb_simple.py  Demo that communicates over USB using serial I/O
from a Raspberry Pi to an Arduino.

To show that it work, this writes a '1' to the Arduino which then 
blinks the builtin LED on and off. The Arduino also sends back an 'A'
to acknowledge that it got the message. This does a read() to get
the 'A', demonstrating that reading also works. Two seconds later,
this writes a '0' to the Arduino which then stops the blinking.
The Arduino again sends back an 'A' to acknowledge that it got the
message and this reads the 'A'.

This was tested between a Raspberry Pi 3B (running Raspbian) and
an Arduino Mega 2560 and also between an NVIDIA Jetson TX1 (running 
Ubuntu) and the same Arduino.
"""

import serial
import time

ser = serial.Serial("/dev/ttyACM0", 115200, timeout=1)

# Reset the Arduino's line. This is key to getting the write to work.
# Without it, the first few writes don't work.
# Clear DTR, wait one second, flush input, then set DTR.
# Without this, the first write fails.
# This trick was learned from:
# https://github.com/miguelasd688/4-legged-robot-model

ser.setDTR(False)
time.sleep(1)
ser.flushInput()
ser.setDTR(True)
time.sleep(2)

while True:

	print('Telling the Arduino to start blinking...')
	ser.write(b'1')

	# read to get the acknowledgement from the Arduino
	while True:
		ack = ser.read()
		if ack == b'A':
			break
	print('Arduino sent back %s' % ack)

	time.sleep(2)

	print('Telling the Arduino to stop blinking...')
	ser.write(b'0')

	# read to get the acknowledgement from the Arduino
	while True:
		ack = ser.read()
		if ack == b'A':
			break
	print('Arduino sent back %s' % ack)

	time.sleep(2)

----

(*) Original: https://rimstar.org/science_electronics_projects/raspberry_pi_to_arduino_serial_usb_communication.htm

== Video

=== Install Raspberry Pi

****
TIP: Learn how to How to install Raspbian on the Raspberry Pi - 1/5

video::646403546[vimeo]
****

****
TIP: Learn how to How to install Raspbian on the Raspberry Pi - 2/5

video::646400963[vimeo]
****


****
TIP: Learn how to How to install Raspbian on the Raspberry Pi - 3/5

video::646477283[vimeo]
****

****
TIP: Learn how to How to install Raspbian on the Raspberry Pi - 4/5

video::646479777[vimeo]
****

****
TIP: Learn how to How to install Raspbian on the Raspberry Pi - 5/5

video::646473366[vimeo]
****

=== Raspberry to Arduino Serial Communication

****
TIP: Learn how to How to Setup Raspberry Pi to Arduino Serial Communication

video::646526465[vimeo]
****

=== Upload  Sketch

A program designed for an Arduino board is called a sketch, and the process of transferring it to the board is called uploading. 

****
TIP: Learn how to How to Upload  Sketch (**)

video::646562968[vimeo]
****



 Windows: It will never be COM1 don't pick that one. You should only have one other option.

 Mac OS X and Linux: It will never be an option with 'bluetooth'  in the name, look for /dev/cu.usbmodem or /dev/cu.usbserial or /dev/ttyUSB or similar!


(**) Original: https://learn.adafruit.com/ladyadas-learn-arduino-lesson-number-1?view=all